以色列理工學院Daniel Rittel教授受聘北理工兼職教授和兼職博導
發布日期：2017-09-04 供稿：機電學院 王崇 攝影：機電學院 廖峭
編輯：廖峭 審核：陳鵬萬 閱讀次數： 
2017年8月30日，北京理工大學在三號樓舉行了兼職教授和兼職博導聘任儀式，聘請以色列理工學院Daniel Rittel教授為我校兼職教授和兼職博士生導師。出席聘任儀式的有副校長方岱寧院士，研究生院、人事處、國際交流合作處和機電學院等單位負責人，以及機電學院和材料學院教師代表。聘任儀式由人事處副處長金海波主持。
機電學院陳小偉教授介紹了Daniel Rittel教授在科學研究領域取得的成就。方岱寧副校長代表學校向Daniel Rittel教授頒發了北京理工大學兼職教授和兼職博導聘書。Daniel Rittel教授發言表示，非常榮幸受聘為北京理工大學兼職教授和兼職博導，希望以此為契機進一步加強與我校的合作，將相關工作落到實處。研究生院肖文英副院長介紹了我校研究生培養情況，并希望Daniel Rittel教授今后為學校研究生培養國際化提供幫助和支持。機電學院院長陳鵬萬發言，希望雙方今后在科學研究、人才培養及“111引智基地”建設等方面的合作取得豐碩的成果。
方岱寧副校長最后發表了講話，他首先向Daniel Rittel教授受聘北京理工大學兼職教授和兼職博導表示熱烈的祝賀，并希望Daniel Rittel教授的加入不僅能為我們帶來前沿的學科信息、研究理念，還將有力的促進北京理工大學和以色列理工學院全方位的交流和合作。
聘任儀式結束后，Daniel Rittel教授作了一場題為“The Physics and Mechanics of Dynamic Shear Localization”的學術報告，并與參會的教師、同學們進行了互動研討，回答了所提問題，報告會氣氛熱烈。
附：Daniel Rittel教授簡介
D. Rittel holds a PhD in Materials Science (1988) from the Hebrew University of Jerusalem. He spent 2 years as a postdoc at Yale University working on the fracture of tungsten base heavy alloys, followed by 3.5 years at EcolePolytechnique (France), working on experimental dynamic fracture mechanics. He joined Technion (Mechanical Engineering) in 1994 where he founded the Dynamic Fracture Laboratory.
As of today, D. Rittel holds the Zandman Chair in Experimental Mechanics, heads the Materials Mechanics Center. He is also the Deputy Senior Vice President (Vice Provost) of Technion.
D. Rittel was the Clark B. Millikan Visiting Professor in Aeronautics (2007) at Caltech where he holds a Visiting Associate position, and incumbent of a Catedra de Excellencia at UC3M (Madrid) in 2012, where he is now Honorary Professor.
Throughout the years, D. Rittel has developed expertise in many aspects of dynamic failure, including fracture mechanics, constitutive behavior, dynamic failure mechanisms and numerical modeling. He is a Fellow of the Society for Experimental Mechanics (SEM) and of the American Society of Mechanical Engineers (ASME).
D. Rittel’s interest is in the thermomechanics and physics of dynamic failure with regard to dynamic fragmentation, fracture, adiabatic shear banding and hysteretic heating. In addition, D. Rittel is also active in the field of biomechanics of dental implants. As of today, he has co-authored about 160 journal publications. Among these journal papers, 2 in Physical Review Letters, 7 in Applied Physics Letters, 2 in Science Report, 13 in Journal of the Mechanics and Physics of Solids, 15 in International Journal of Impact Engineering, 19 in Mechanics of Materials, 25 in Experimental Mechanics, 10 in International Journal Solids and Structures.
Dr. Rittel is Associate Editor of Mechanics of Materials, the International Journal of Engineering Science, as well as the International Journal of Impact Engineering. In 2015, D. Rittel was awarded the prestigious GiliAgostinelli Prize (Torino Academy of Sciences, Italy) for his work on adiabatic shear localization. In 2018, he will receive the BJ. Lazan award from the SEM.
分享到：